• Send Us a Message
  • Skip to content
    LIVING IN AND AROUND BANGALORE ? CALL US @ +91 80502 00008 / +91 70221 98111 FOR SPECIAL PRICES
    LIVING IN AND AROUND BANGALORE ? CALL US @ +91 80502 00008 / +91 70221 98111 FOR SPECIAL PRICES

    Lutron Wireless Narrow Beam Occupancy Sensor

    by Lutron
    Availability: translation missing: en.general.icons.icon_check_circle icon Out of stock

    Notify me when back in stock

    Lutron Radio Powr Savr wall-mounted occupancy and vacancy sensors are wireless, battery-powered, passive infrared (PIR) sensors that automatically control lights via RF communication to compatible dimming or switching devices. These sensors detect the heat from people moving within an area to determine when the space is occupied. The sensors then wirelessly transmit the appropriate commands to the associated dimming or switching devices to turn the lights on or off automatically. They combine both convenience and exceptional energy savings along with ease of installation.


    • Wireless occupancy/vacancy sensor has 2 settings
    available: Auto-On / Auto-Off, and Manual-On / Auto-Off
    • Vacancy model meets CA Title 24 requirements
    • Passive infrared motion detection with exclusive Lutron XCT
    Technology for fine motion detection
    • 180° field of view model:
    – Minor motion = 1500 ft2 (139.4 m2)
    – Major motion = 3000 ft2 (278.7 m2)
    • 90° field of view model:
    – Minor motion = 1225 ft2 (113.8 m2)
    – Major motion = 2500 ft2 (232.3 m2)
    • Hallway model with long, narrow field of view:
    – Major motion = coverage of up to 150 ft (45.7 m)
    • Simple and intuitive adjustments available for Timeout,
    Activity, and Auto-On settings
    • Accessible test buttons make setup easy
    • Lens illuminates during test mode to verify ideal locations
    • Multiple sensors can be added for extended coverage; refer
    to product specification submittal of receiving device to
    determine system limits
    • 10-year battery life design
    • RoHS compliant

    Compatible RF Devices
    • For use with Lutron products only
    • Supports simultaneous association with multiple Lutron
    Clear Connect devices and / or systems*



    • Lutron Quality Systems Registered to ISO 9001:2008

    Regulatory Approvals

    • cULus® listed
    • FCC certified
    • IC certified
    • COFETEL certified
    • ANATEL certified
    • SUTEL certified
    • Meets CA (U.S.A.) Energy Commission Title 24
    • CE marked (European Union)
    • TRA type approved (United Arab Emirates)
    • CITC type approved (Saudi Arabia)
    • SRRC type approved (Mainland China)
    • iDA registered (Singapore)
    • WPC type (India)

    • Operating voltage: 3 V-
    • Operating current: 14 μA nominal
    • Requires one CR 123 lithium battery
    • 10-year battery-life design
    • Non-volatile memory (saved changes are stored during power loss)


    • Temperature: 32 °F to 104 °F (0 °C to 40 °C)
    • For indoor use only
    • Relative humidity: less than 90% non-condensing

    RF Range
    • Distance between local load controls and sensor should not exceed 60 ft (18 m) line-of-sight or 30 ft (9 m) through walls.

    Sensor Coverage Test

    • Dedicated test button
    • Lens illuminates orange in response to motion during test mode

    Wireless Communication Test

    • Dedicated test button
    • Turn associated loads on and off

    Timeout Options

    • 1 minute*
    • 5 minutes
    • 15 minutes (default setting)
    • 30 minutes

    Auto-On Options (Occupancy Versions Only)

    • Enabled: Sensor turns lights ON and OFF automatically (default setting)
    • Disabled**: Lights must be turned ON manually from dimming or switching device. Sensor turns lights OFF automatically

    Sensitivity Options

    • Low Activity: (default setting)
    • Medium Activity
    • High Activity