• Send Us a Message
  • Skip to content
    LIVING IN AND AROUND BANGALORE ? CALL US @ +91 80502 00008 / +91 70221 98111 FOR SPECIAL PRICES
    LIVING IN AND AROUND BANGALORE ? CALL US @ +91 80502 00008 / +91 70221 98111 FOR SPECIAL PRICES

    Lutron Wireless Occupancy Sensor (180 Degree)

    by Lutron
    Availability: translation missing: en.general.icons.icon_check_circle icon Out of stock

    Notify me when back in stock

    Lutron Radio Powr Savr occupancy / vacancy sensors are wireless, battery-powered, passive infrared (PIR) sensors that automatically control lights via RF communication to compatible dimming and switching devices. These sensors detect the heat (IR radiation of 9.5 μm) from people moving within an area to determine when the space is occupied. The sensors then wirelessly transmit the appropriate commands to the associated dimming and switching devices to turn the lights on or off automatically. They combine both convenience and exceptional energy savings potential along with ease of installation.


    • Wireless occupancy sensor has 3 settings available: Auto-On/Auto-Off, Auto-On Low-Light/Auto-Off, and Manual-On/Auto-Off
    • Auto-On Low-Light feature will turn lights on automatically only if there is less than approximately 10 Lux (1 fc) of ambient light
    • Vacancy-only model available to meet California (U.S.A.) Title 24 requirements
    • Uses Clear Connect technology
    • Passive infrared motion detection with exclusive Lutron XCT Technology for fine motion detection
    • 30˚ coverage ranges from 324 ft2 (30.2 m2) to 676 ft2 (62.4 m2), depending on mounting height
    • Simple and intuitive adjustments available for Timeout, Auto-On, and Activity settings
    • Supports advanced occupancy features, such as dependent occupancy groups and customizable occupied/unoccupied presets in some systems
    • Multiple sensors can be added for extended coverage. Refer to product specification submittal of receiving device to determine system limits
    • Lens illuminates during test mode to verify ideal locations
    • Multiple ceiling-mount methods available for different ceiling materials
    • Front accessible test buttons make programming easy
    • 10-year battery life design
    • RoHS compliant


    • Lutron Quality Systems Registered to ISO 9001:2008

    Regulatory Approvals

    LRF2- (USA and Canada)
    • cULus Listed
    • FCC certified
    • IC certified
    • Meets CA (U.S.A.) Energy Commission Title 24 requirements
    • COFETEL certified
    • ANATEL certified
    • SUTEL certified


    • CE marked (European Union)
    • TRA type approval (United Arab Emirates)
    • CITC type approval (Saudi Arabia)

    • SRRC type approval (Mainland China)
    • iDA registered (Singapore)

    • WPC Type (India)

    • 007YUUL0689

    • FCC

    • Operating voltage: 3 V-
    • Operating current: 14 μA nominal
    • Requires one CR 123 lithium battery
    • 10-year battery life
    • Non-volatile memory (saved changes are stored during
    power loss)

    • Temperature: 32 ˚F to 104 ˚F (0 ˚C to 40 ˚C)
    • For indoor use only
    • Relative humidity: less than 90% non-condensing

    RF Range
    LRF2-, LRF3-, LRF4-, LRF5-, LRF7-
    Local load controls must be located within 60 ft (18 m) line-of-sight, or 30 ft (9 m) through walls, of a sensor.
    Local load controls must be located within 40 ft (12.2 m) line-of-sight, or 23 ft (7 m) through walls, of a sensor.

    Sensor Coverage Test

    • Front accessible test button
    • Lens illuminates orange in response to motion during test mode and is visible from 60 ft (18 m)

    Wireless Communication Test

    • Front accessible test button
    • Turn associated loads on and off

    Timeout Options
    • 1 minute*
    • 5 minutes
    • 15 minutes (default setting)
    • 30 minutes

    Auto-On Options (Occupancy Versions Only)
    • Enabled: Sensor turns lights ON and OFF automatically (default setting).
    • Low Light: Sensor turns lights ON automatically only in low ambient light conditions; sensor turns lights OFF automatically.
    • Disabled: Lights must be turned ON manually from dimming or switching device; sensor turns lights OFF automatically.

    Activity Options

    • Low Activity: (default setting)
    • Medium Activity
    • High Activity