Skip to content
LIVING IN AND AROUND BANGALORE ? CALL US @ +91 80502 00008 / +91 70221 98111 FOR SPECIAL PRICES
LIVING IN AND AROUND BANGALORE ? CALL US @ +91 80502 00008 / +91 70221 98111 FOR SPECIAL PRICES

Marantz PM-KI RUBY - Stereo 200W Power Amplifier

by Marantz
Sale
Original Price Rs. 559,900.00
Current Price Rs. 559,890.00

Notify me when back in stock

PM-KI RUBY

Enjoy enhanced quality audio with your speakers, audio source, and the Marantz PM-KI Ruby Stereo 200W Power Amplifier. It outputs up to 100W per channel RMS at 8 ohms and can drive 4 ohm speakers at 200W each. It features seven total stereo RCA inputs, including one reserved for a MM or MC turntable. Omitting the inclusion of any digital connectivity helps retain a clean path for the analog audio signal to pass through.

HDAM (Hyper Dynamic Amplifier Module) Technology

The onboard HDAM SA3 and SA2 are combined with an optimized circuit design layout to help provide enhanced sound quality and performance.

Marantz Musical Premium Phono EQ

Designed to deliver optimal sound by simplifying the signal path, the Marantz Musical Premium Phono EQ stage can be used with both moving magnet and moving coil cartridges thanks to a built-in MC head amplifier. Distortion is reduced by using two-stage amplification in the phono stage, and Maranz HDAMs are combined with JFETs (junction gate field effect transistors) in the output stage to provide high input impedance. The exclusion of coupling capacitors further simplifies the design, reducing signal distortion and enhancing signal purity.

Electronic Volume Control

The electronic volume control uses its IC to augment channel separation, dynamic range, and distortion reduction, while retaining the operational feel of an analog volume control device. This volume control is designed for high linearity as well.

Current Feedback Amplifier

Current Feedback amplification is engineered to match the requirements of Super Audio hi-res music for wide-bandwidth, high-speed reproduction. The impedance at the Current Feedback point is limited, generating a low phase shift. This reduces the need for phase compensation by minimizing Negative Feedback (NFB), simplifying the signal path, contributing to a high through-rate with enhanced transient response and sonic transparency across the bandwidth. Current Feedback also makes the amplifier insensitive to difficult speaker loads.

Designed to Deliver Power

The PM-KI Ruby is designed to maintain the purest possible sound and support the power needed for demanding speakers. The amplifier output stage delivers up to 100W per channel into an 8-ohm load, and can cope with high-impedance speakers as well, delivering up to 200W per channel into 4 ohms. The amplifier module connects directly to the rear panel PCB to help maintain signal purity and sound stability.

Pure Analog Amplifier

Rather than build a DAC into the amplifier, which would add noise within the chassis, the PM-KI Ruby is dependent on the DAC built into the audio source, eliminating interference with the analog signals passing through the amp to help maintain an analog environment that's as pure and clean as possible.

Multiple Analog Inputs and Outputs

In addition to nickel-plated copper phono and CD analog inputs, the PM-KI Ruby features two line-level inputs and two pairs of recorder input/output jacks that allow the connection of multiple sources and recorders. You can use it as a standalone stereo amplifier for additional system configuration versatility with the power amp input, or connect the PM-KI Ruby to an external amplifier via the stereo pre-amp outputs.

Dedicated Headphone Output

Thanks to the onboard HDAM discrete modules, the headphone circuit is designed to deliver enhanced audio fidelity with a wide range of headphone types and impedances, including low-impedance headphones.

System Remote Control

Use the included remote control to operate the PM-KI Ruby and other compatible equipment, such as the SA-KI Ruby SACD player. Remote control input and output jacks are also onboard for further configuration flexibility.

Additional Features

  • Copper-plated chassis helps reject mechanical and electrical interference
  • Non-magnetic aluminum front panel
  • 0.2" thick aluminum top cover
  • Switching amplifier design
  • Discrete, two-stage design for signal purity, with separate power supplies for the preamp and power amplifier to help reduce interference
  • Toroidal power transformer dedicated to the preamp for clarity and powerful sound
  • Schottky diodes designed for low-leak
  • Low-noise complementary transistors
  • Electrolytic, film, and mica capacitors
  • Laser-engraved Ken Ishiwata signature and ruby motif, marking Ishiwata's 40-year legacy with Marantz
  • Symmetrical PCB layout
  • Aluminum extrusion heat sink
  • Balance, bass, and treble controls
  • Linear Drive Power Supply
  • Linear volume control
  • Copper system block shielding
  • Double-layer bottom plate
  • Low-noise OLED display
  • Source Direct
  • Power Amp Direct
  • Standby Mode
  • Nickel-plated CD and Phono RCA inputs; others are gold-plated
  • D-Bus