Mission ZX-5 - Floor Standing Speakers (Pair)
3 - Way Floorstanding Speakers
NEW RING DOME TREBLE UNIT
Mission’s Ring Dome treble unit overcomes the problems inherent in conventional domes. With this technology the centre of the dome is ﬁxed and voice coil attached part of the way across the dome. The dome is formed into two rings, with the voice coil in the centre so that it can drive the dome more accurately and efﬁciently.
The result is lower distortion and superior performance, at frequencies up to 30 kHz and beyond. Transient performance is dramatically improved, as is musical detailing, particularly of instrument overtones and harmonics.
NEW DIADRIVE BASS/MIDRANGE UNIT
Mission’s DiaDrive bass unit has an advanced aluminium matrix cone and is now vented to remove trapped air behind the diaphragm, thus reducing resonance and allowing a clearer midrange performance to beyond 3kHz.
In ZX the driver surround is covered by a vented cover which controls the spurious output from the diaphragm edge, again improving midrange clarity.
Matching ‘serrations’ are built into the ﬂare of the slot port. High pressure airﬂow is streamlined from the port exit whilst the asymmetric design breaks up the ‘chufﬁng’ distortion normally heard from circular ports.
NEW CABINET / DRIVER BRACING SYSTEM
Mission ZX bass/midrange units now feature, as standard, over-size magnet systems to deliver the punch and transient attack that feature in modern recordings.
To improve the mechanical integrity of these magnet systems, special bracing methods have been developed to ensure that the bass diaphragms respond accurately to the musical waveform. Bass output is now thrillingly dynamic with superior detailing and extension.
FINE TUNED CROSSOVER PERFORMANCE
ZX CONTINUES TO TELL THE STORY
|General Description||3-way floorstanding speaker|
|Enclosure Type||Bass reflex|
|Bass Driver||6.5" (165mm) aluminium cone x2|
|Midrange Driver||5.25" (130mm) aluminium cone x2|
|Treble Driver||1.5" (38mm) ring dome|
|Sensitivity (2.0V @ 1m)||91dB|
|Recommended Amplifier Power||30-200W|
|Nominal Impedance||4 Ohms (compatible 8 Ohms )|
|Minimum Impedance||3.4 Ohms|
|Frequency Response(+/-3dB)||36Hz ~ 24kHz|
|Dimensions (HxWxD)||1155 * 265 * (400+12)mm|